0items in your cart

Untitled Document

Bracket Finder

Cart Subtotal: $0.00

FAQ’s

1. How do your brackets compare to those of other bracket manufactures?

A: The fact of the matter is if you can find a bracket for less, that will bolt to your factory floorboard with little to no modifications, allow your factory belts to work as they were intended, won’t put your head through the roof, and will sit you centered to the steering wheel, then you found a great deal. You would more than likely have to go to a local welder or fabricator and spend several hundred dollars to make this happen. Luckily we already did it for you. What we can say with absolute certainty is if you pay a penny more for a bracket over that of a Wedge bracket, you are throwing money away. There is a reason we’ve been around the longest; we know aftermarket brackets better than anyone else. You have a lifetime warranty, we will modify the bracket to your liking if necessary, and you won’t find a better price.

 

2. Do you make brackets for any seat manufacturer?

A: At this time we only make brackets with bolt patterns to fit Corbeau and Recaro seats.

 

3. Will your brackets fit my seats?

A: Our brackets will work with Corbeau or Recaro seat models. Our brackets do not work with OEM/Factory seats.

 

4. Will I have to modify anything to mount your brackets in my car?

A: We have a custom bracket for almost every vehicle ever made. In 99% of cases, our bracket will bolt to your floor with little to no modifications. The brackets were designed from the factory bracket and floorboard. In some cases, especially in older vehicles, floorboards can shift ever so slightly or there can be variations of floorboards for certain year vehicles. If you need us to modify a bracket because it doesn’t fit perfectly, we are happy to do so. Just send the bracket back specifying what changes need to be made and we’ll make it happen. Make sure to call us first and let us know what needs to be done.

 

5. What is the difference between an adapter and complete replacement bracket?

A: An adapter bracket adapts your aftermarket seat to the stock sliders. A complete replacement bracket is just that, a bracket that completely replaces your stock bracket and bolts to the holes in your floorboard.

 

6. What brackets do I need?

A: To determine which bracket you will need please use the bracket finder at the top of the page or look at our bracket guide. Any questions just give us a call at 801-912-0450.

 

7. Can I still use my factory seat belts?

A: In most cases, you can still use your factory seat belts.

 

8. How much do Wedge seat brackets weigh?

A: Wedge seat brackets will weigh between 10-15 pounds depending on the bracket.

 

9. Are your brackets taller/shorter than my stock brackets?

A: We do our best to design our seat brackets to sit your aftermarket seats at the same height as your OEM/Factory seats. The real factor that determines the height of your seats is the thickness of the seat base compared to that of your factory seats. In other words, if your factory base is only two inches thick but your aftermarket seat base is four inches thick, you’ll more than likely be sitting about two inches higher than stock.

 

10. Does Wedge sell side mount brackets?

A: At this time we do not offer a side mount option.

 

11. Do I need any additional adapters with brackets?

A: For most seat manufactures an additional adapter is not needed. Seats that have vertical mounting tabs on the bottom will need an additional adapter to adapt the vertical tabs to a flat mounting surface. For example, a lot of suspension seats in the industry have four vertical tabs on the bottom designed for mounting to a roll cage. With these tabs, the seat cannot bolt to a flat mounting surface. Wedge has an adapter available that will bolt to these vertical tabs to create a flat surface and allow the seat to bolt to a Wedge seat bracket. If you have any questions regarding this adapter please call us at 801-912-0450.

 

12. What is the difference between single and double locking sliders?

A: When ordering brackets you’ll need to decide whether you want single locking sliders or double locking sliders. In some cases, you’ll get these directly from the seat manufacturer or you can get them from us direct. Single locking sliders have a single handle that you pull to the side to slide your seat forward and back and only one of the slider rails locks. Double locking sliders have a bar that connects the rails on each side of the bracket and you lift up on this bar to slide forward and back. Both rails will lock on a double locking slider.

 

13. What is the difference between tab and flat sliders?

A: Tab sliders have vertical mounting tabs on each end of the sliding rail. In most cases, you will have three height adjustment holes. Flat sliders mount flat to the top side of your bracket and in most vehicles will allow you to sit lower compared to tab sliders. Unless you already have tab sliders from the seat manufacturer we will in most cases make your bracket to accommodate flat sliders. Again this can vary depending on the bracket.